A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Clicking the Modify button on the OSPFv3 Area Table window will reveal the following window to configure:
Figure 4- 66. OSPFv3 Area Settings - Edit window
The OSPFv3 Area configurable settings are as follows:
Parameter Description
Area ID
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the
OSPFv3 area in the OSPFv3 domain.
Type
This field can be toggled between Normal and Stub using the pull-down menu. When it is
toggled to Stub, the additional field Stub Summary will then be capable of being configured.
Stub Summary
Displays whether or not the selected OSPFv3 Area will allow Summary Link-State
Advertisements (Summary LSAs) to be imported into the area from other areas.
Metric (0-65535)
Displays the default OSPFv3 cost for the route to the stub of between 0 and 65,535. The
default is 1.
Click Apply to implement changes made.
226