xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 2- 78. SNMP Host Table Configuration window for IPv6
The following parameters can set:
Parameter Description
Host IPv6 Address
Type the IPv6 address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv
security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click Apply. To return to the SNMP Host Table window, click the Show All SNMP Host Table
Entries link.
SNMP Engine ID
Figure 2- 79. SNMP Engine ID window
The Engine ID is a unique identifier used for SNMP V3
implementations. This is an alphanumeric string used to
identify the SNMP engine on the Switch.
To display the Switch's SNMP Engine ID, click
Administration > SNMP Manager > SNMP Engine
ID, as shown.
To change the Engine ID, enter the new Engine ID in the space provided and click the Apply button.
71
