A SERVICE OF

logo

Open as PDF
next previous
xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
DHCPv6 Server Excluded Address Settings
This window is used to configure the reserved IPv6 addresses on the DHCPv6 server.
To view this window, click L3 Features > DHCPv6 Server > DHCPv6 Server Excluded Address Settings, as shown below:
Figure 4- 93. DHCPv6 Server Excluded Address Brief Table window
Clicking the View button will reveal the following window to configure:
Figure 4- 94. DHCPv6 Server Excluded Address Settings - Add window
The following parameter may be configured:
Parameter Description
Pool Name
Enter the name of the DHCPv6 pool for which to add or delete the excluded address
information.
Begin Address
Enter the beginning IPv6 address of the range of IPv6 addresses to be excluded from the
DHCPv6 pool.
End Address
Enter the ending IPv6 address of the range of IPv6 addresses to be excluded from the DHCPv6
pool.
Click Apply to implement changes made. To remove an entry from the table, click its corresponding under the Delete heading.
245