A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 2- 22. Port Mirror Settings - Add window
To modify an existing mirror port, click the Modify button of the corresponding entry, and the window below appears:
Figure 2- 23. Port Mirror Settings - Edit window
The following parameters are displayed or can be configured:
Parameter Description
Group ID (1-4)
Enter or display the group ID this entry belongs to.
Target Port
Tick the check box and enter the port which received the copies from the source port.
State
Use the pull-down menu to enable or disable the mirror group function.
Source Ports
Action
User the pull-down menu to add or delete the source port.
RX Source Ports
Only the received packets on the mirror group source ports will be mirrored to the mirror group
target port.
TX Source Ports
Only the sent packets on the mirror group source ports will be mirrored to the mirror group
target port.
Click the Show All Port Mirror Entries link to return to the Port Mirror Settings window. Click Apply to implement the changes.
25