xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
To modify an existing entry of its source settings, click the corresponding Modify button in Modify Source, revealing the
following window to configure:
Figure 2- 65. RSPAN Source Settings (Edit) window
The following fields can be configured:
Parameter Description
VLAN Name
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN which will
modify the RSPAN entries.
VID (1-4094)
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN which will to
modify the RSPAN entries.
Mirror Group ID (1-4)
Tick the check box and enter a group ID which mirror session is used for RSPAN source
function.
Target Port
The mirror group Target Port which the mirror session used for the RSPAN source
function.
Source Ports Action
Use the pull-down menu to display the source port only.
Rx Source Ports
The goal of Rx source ports is to monitor as much as possible all the packets received
by the source interface or VLAN before any modification or processing is performed by
the switch. A copy of each packet received by the source is sent to the destination port
for that RSPAN session.
Tx Source Ports
The goal of Tx source ports is to monitor as much as possible all the packets sent by the
source interface after all modification and processing is performed by the switch.
Click Apply to implement the changes.
61
