xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
IP Address
Enter the IP address of the neighbor to be configured.
Peer Group Name
Enter the peer group to be configured.
Filter List Type
Toggle between In and Out to apply to either inbound or outbound traffic.
Filter List Action
Toggle between Add and Delete.
Filter List Name
Enter the name of an AS path access list to be applied as a filter. The filtering can be applied
to incoming routes or outgoing routes.
Prefix List Type
Toggle between In and Out to apply to either inbound or outbound traffic.
Prefix List Action
Toggle between Add and Delete.
Prefix List Name
Enter the name of a prefix list to be applied as a filter. The filtering can be applied to incoming
routes or outgoing routes.
Capability ORF
Prefix List Type
Use to configure an outbound route filter prefix list capability. It can be sent with the following
values:
Receive: Enable the ORF prefix list capability in the receiving direction. The local router will
install the prefix filter list notified by the remote router.
Send: Enable the ORF prefix list capability in the sending direction. The local router will notify
the remote router for the ORF prefix list capability.
Both: Enable the ORF prefix list capability in both received and send directions.
None: Disable the ORF prefix list capability in both received and send directions
Click Apply to implement changes made.
BGP Reflector Settings
This window is used to configure the BGP’s neighbor of the route reflector client.
To view this window, click L3 Features > BGP > BGP Reflector Settings, as shown below:
Figure 4- 141. BGP Reflector Settings window
283
