xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
802.1X User Settings
This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users
that can be learned via 802.1X authentication.
To view this window, click Security > 802.1X > 802.1X User Settings, as shown below:
Figure 7- 28. 802.1X User Settings window
This window allows setting of the following features:
Parameter Description
Max User (1-4000)
Enter the maximum number of users to be allowed. Tick the No Limit check box to specify that
there will be the maximum number of users. By default there is no limit.
User Name
Enter the User Name of the new profile to be created.
Password
Enter a password for the new user.
Confirm Password
Re-enter the password entered in the field above.
Click Apply to implement the changes. The new User will be displayed in the 802.1X User Table. To remove a user, click the
corresponding
button.
NOTE: The user must first globally enable 802.1X in the DGS-3600 Web
Management Tool window before setting up ports.
Initialize Port(s)
Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
To view this window, click Security > 802.1X > Initialize Port(s), as shown below:
367
