A SERVICE OF

logo

62 Maintaining Your Printer
4. Open the cartridge cover.
5. Press in the tab on the back end of the empty
cartridge to unlock it. Then squeeze both
tabs, lift the cartridge out of the printer, and
dispose of it carefully.
6. Remove the new cartridge from its package.
7. Slide the new cartridge into its slot. The side
with the green circuit board goes in the back
of the slot.
8. Press the cartridge down until it clicks into
place.
9. If you need to replace any other ink
cartridges, repeat steps 5 through 8. Then
close the cartridge cover.
10. Close the printer cover and press the H ink
button. The printer begins charging the ink
delivery system.
The lights flash and the printer makes noise.
Charging takes about a minute. When it’s
finished, the green P power light stops
flashing and stays on, and the red
H ink light
turns off.
Caution: Never turn off the printer while the
green
P power light is flashing, unless the
printer hasn’t moved or made noise for more
than 5 minutes.
Caution: Don’t touch the green circuit
board on the back of the cartridge; you may
inhibit normal operation and printing.
sp960basics.book Page 62 Friday, January 17, 2003 2:39 PM