Installing Your Printer Software 69
6. When you’re finished, close any open windows and click Back to return to the
Options Menu.
7. Click Install Printer Information Center, then follow the on-screen
instructions.
8. At the Options Menu, click Exit.
9. When you see the registration screen, register your printer with EPSON as
instructed. Remove the CD-ROM and keep it in case you need to reinstall any
software later.
10. Restart your computer if prompted. You’re ready to print.
Installing Printer Software on
Windows 2000
Before you start, make sure your printer is set up, connected to your computer, and
turned on, as described on the Start Here sheet. Installation takes place in several
phases. Follow the instructions in the two sections below, first to install your printer
driver, and then to install additional software.
Installing the Printer Driver for Windows 2000
1. Turn on your computer.
2. Wait for Windows to detect your printer
connection and display a screen like this:
Don’t click any buttons on the screen yet.
Note: If this screen doesn’t appear, make sure
your printer is turned on and connected.
3. Put the EPSON CD-ROM in your
CD-ROM or DVD drive and wait a few
seconds for the CD-ROM to be recognized.
4. Click Next.
sp960basics.book Page 69 Friday, January 17, 2003 2:39 PM
