Frye FP35 Manual

A SERVICE OF

next previous

Real-Ear Measurements 129

5.3.9 Starting a New Client

When you have finished performing the real-ear (or target coupler) measure-

ments on the hearing aid and patient, pressing [F1] in the Audiogram Entry

screen will erase all measurements and restore settings in order to make setting

up for a new patient quick and easy.

In addition to all audiometric and real-ear measurements being erased, the

following menu items are reset when [F1] is pressed in the Audiogram Entry

screen. They are also set when the analyzer is powered on or when the [RESET]

key is pressed.

• CHANNELS–1(usedbyNAL-NL1only)

• AIDLIMITING–Wideband(usedbyNAL-NL1only)

• FITTYPE–Unilateral(usedbyNAL-NL1only)

• VENT–Tight(usedbyNAL-NL1TargetCoupleronly)

• TUBING–Libby#4(usedbyNAL-NL1TargetCoupleronly)

• SOUNDFIELD–45degrees

• TARGETREF–REF#2

• TABULATION–Target

• REFMETHOD–HEADSURFACE

The following menu items are set to their default values only when the analyzer

is first powered on. They aren’t reset when NEW CLIENT is pressed or when

[RESET] is pressed. Their default values can be changed in the Default Settings

menu. See Section 2.3.1. (The listed values are the factory defaults.)

• FITRULE–NAL-NL1

• AGE–Adult

• ASSESSMENT–Ins.Ear

• COMPRESSION–52dB(usedbyNAL-NL1andDSLonly)

• AIDTYPE–ITC

• AIDGROUP–Standard

• REFMIC–ON

• COUPLERTYPE–2cc(usedbyCouplermeasurementscreensonly)

5.3.10 Defining the Menu Items

This section describes all the menu items in the Main and Advanced Audiogram

Entry menus.

Main Audiogram Entry menu

Press [MENU] from the Audiogram Entry screen to open the Audiogram Entry

menu. The following choices are available: