A SERVICE OF

logo

Target Coupler 17 9
*DISTORTION SWEEP—The frequencies used in the intermodulation distortion
measurement. NORM uses 1/12 octave frequencies to the nearest 100 Hz. FAST
uses 1/3 octave frequencies to the nearest 100 Hz. FULL uses every 100 Hz fre-
quencies available.
*DIST SWEEP END—The last frequency tested when performing an IM distor-
tion sweep. If the selected frequency is less than or equal to the first primary
frequency in the IM distortion sweep, only the primary frequency will be tested;
there will be no IM distortion sweep.
* These menu items are only available when the USER LEVEL is set to
ADVANCED in the Default Settings menu. See Section 2.3.2 for details.