24 FONIX FP35 Hearing Aid Analyzer
2.2 Opening Screen
The Opening Screen of the FP35 hearing aid analyzer is the starting point and
the returning point for all operations. To switch between coupler measure-
ments, real-ear measurements, and the automated test sequences, you always go
through the Opening Screen. It is also the only screen from which the Default
Settings Menu is accessible.
2.2.1 Entering the Opening Screen
You can reach the Opening Screen by turning the FP35 on (plug it in or press
the [OPERATE] key if it is powered down), by pressing the [RESET] key, or by
repeatedly pressing [EXIT] from any other screen on the analyzer.
2.2.2 Opening Screen Display
The Opening Screen displays the Frye Electronics logo, the factory mailing (not
shipping) address, the factory phone number, the software version currently
being used by the FP35, the instrument’s ID number, the microphone’s ID num-
ber, and the option code. See Figure 2.2.2. A thick line above one of the func-
tion keys indicates that was the last screen exited.
Figure 2.2.2 –Opening Screen
