Note: The FP35 is fully upgradeable. These options can be added to an existing
unit.
ISI
An automated test sequence conforming to the Indian ISI IS-10775-1984 standard.
1.5 Setup
Unpack and locate all of the accessories. If you ordered the briefcase as
an optional accessory, the FP35 and its accessories will be packed inside.
Otherwise, the instrument and its accessories will be packed in boxes.
Keep the shipping box in case you need to send the unit in to us for repair.
Choose a location for your FP35 that is relatively free of ambient noise. Begin by
plugging in the power supply to the back panel. See Figure 1.2.3 for an illustra-
tion of the back panel.
The FP35 will power up as soon as you plug the power cord into the wall. To
power it down again, either unplug it, or push the [OPERATE] key. Unplugging
the FP35 turns it completely off; pushing the [OPERATE] key powers the unit
down, but the circuit continues to receive power.
Once you have power to the unit, you are ready to proceed.
1.6 Safety
Safety Classification for IEC 60601-1
Type of protection against electric shock: Class I
Degree of protection against electric shock: Type B
Protection against harmful ingress of water: Ordinary
Mode of operation: Continuous
The FP35 does not require sterilization or disinfection.
Warning: This equipment is not suitable for use in the presence of flammable
anaesthetic mixture with air or with oxygen or nitrous oxide.
Connection of peripheral equipment to the FP35
Compliance with IEC 60601-1-1 Safety requirements for medical electrical sys-
tems must be determined on a case-by-case basis.
All electrical equipment attached to the FP35, such as video monitors, computer
equipment, etc. must, at a minimum, meet one of the following conditions:
a. The equipment complies with IEC 60601-1
14 FONIX FP35 Hearing Aid Analyzer
