first, since many problems can be fixed without returning the whole unit. If
something must be returned, a return authorization number (RMA) will be
issued to be attached to all returned materials.
When contacting the factory, please have the serial number of your instrument
on hand. Look for this number on the rear panel of the instrument. It will also
be helpful for you to be able to tell us the software version installed on your
machine. Check the Opening Screen for this information.
1.7.2 Cleaning the Instrument
For your safety, disconnect the FP35 power supply from the mains power while
cleaning.
Wipe the FP35 case with a slightly moist, but not dripping, soft cloth. Use plain
water or water with mild dishwashing detergent. Wipe away any detergent with
a slightly moist cloth, then dry the FP35.
The LCD surface can be easily damaged so wipe lightly and use a soft, water-
dampened cloth to clean it. Do not allow liquid to enter the LCD opening.
The microphones should be wiped with a dry cloth. Excess moisture may dam-
age the microphone.
The external power supply may be cleaned with a cloth dampened with clean-
ing alcohol. Clean the outside of the enclosure only.
Warning: Do not immerse the power supply in water or a safety hazard could
arise during use.
Never allow fluid to enter:
• TheLiquidCrystalDisplay(LCD)
• Theelectronicsmodule
• Theelectricalconnectors
• Theexternalpowersupply
Solvents and abrasives will cause permanent damage to the FP35.
1.7.3 Warranty
The FONIX FP35 and its accessories are guaranteed to be free of manufactur-
ing defects which would prevent the products from meeting the specifications
(given in Appendix A of this manual) for a period of one year from the date of
purchase.
An Overview of the FP35
17
