Administrator’s Guide for Polycom QDX 6000 Systems
6-3
managing multiple systems that call the same locations. You can:
Transfer the existing directory entries between Polycom QDX 6000
systems.
Develop directory entries on one system, save them to your computer,
and then distribute them to other systems.
Create localized directory entries.
Only the local directories can be downloaded. The directory file is in the .csv
format.
To download a Polycom QDX 6000 system directory to your computer:
1 On a computer, open a web browser.
2 In the browser address line, enter the system’s IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 Web interface.
3 Go to Utilities > Import/Export Directory.
4 Click
to download the .csv file from the Polycom
QDX 6000 system.
To upload Polycom QDX 6000 system directory entries:
1 On a computer, open a web browser.
2 In the browser address line, enter the system’s IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 Web interface.
3 Go to Utilities > Import/Export Directory.
4 Click
.
5 Click Browse and browse to the location of the .csv file on your
computer.
6 Click Export Directory to upload the .csv file to the Polycom QDX 6000
system.
Configuring the Global Directory
The global directory provides a list of other systems that are registered with
the Global Directory Server and available for calls. The other systems appear
in the directory, allowing users to place calls to other users by selecting their
names.
To configure the directory server settings:
1 Go to System > Admin Settings > Global Services > Directory Servers.
2 Configure these settings on the Global Directory Servers screen:
Setting Description
Global Directory
(GDS)
Specifies the IP address or DNS address of the Global
Directory Server. You can enter up to five addresses.
Password
Lets you enter the global directory password, if there is one.
Register
Registers this system with the Global Directory Server.
