7-1
7
System Location and Appearance
Setting Date, Time, and Language
You can update the system with regional settings, including the
location-specific language and time.
To set the language for the user interface:
1 Go to System > Admin Settings > General Settings > Language.
2 Set the language for the user interface.
To set the date and time:
1 Go to System > Admin Settings > General Settings > Date and Time.
2 Configure these settings on the Time Zone screen:
Setting Description
Auto Adjust for
Daylight Saving
Time
Specifies the daylight savings time setting. When you enable
this setting, the system clock automatically changes for
daylight saving time.
Time Zone
Specifies the time difference between GMT (Greenwich Mean
Time) and your location.
Time Server
Specifies connection to a time server for automatic system
time settings.
The date and time must be manually reset every time a
Polycom QDX 6000 system restarts, in the following cases:
Time Server is set to
Off
.
Time Server is set to
Manual
or
Auto
, but the system cannot
connect to a time server successfully.
Time Server
Address
Specifies the address of the time server to use when Time
Server is set to
Manual
.
3 Select
and configure these settings on the Date and Time screen:
Setting Description
Date Format
Specifies your format preference for the date display.
Time Format
Specifies your format preference for the time display.
Current Date
Lets you enter your local date.
Current Time
Lets you enter your local time.
