Managing the System Remotely
9-2
To enable room and call monitoring:
1 Go to System > Admin Settings > General Settings > Security.
2 Select
and enable Allow Video Display on Web to allow the room
or call to be viewed remotely.
To view a room or call:
1 On a computer, open a web browser.
2 In the browser address line, enter the system’s IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3 Go to Utilities > Web Director.
4 Perform any of the following tasks:
― Place or end a call
― View near and far sites
― Change camera sources
― Adjust camera position
― Zoom cameras
― Adjust system volume settings
― Mute and unmute the microphones
― Switch the PIP layout.
― Preset camera position
You can view near and far sites without opening Web Director by selecting
Tools > Remote Monitoring.
Managing System Profiles with the Polycom QDX 6000 Web Interface
Administrators managing systems that support multiple applications can
change system settings quickly and easily using profiles. You can store a
Polycom QDX 6000 system profile on a computer as a .csv file using the
Polycom QDX 6000 web interface. There is no limit to the number of profiles
you can save.
The following settings are included in a profile:
Home screen settings
User access levels
Icon selections
Option keys
System behaviors
Passwords are not included when you store a profile.
Polycom recommends using profiles only as a way to back up system settings.
Attempting to edit a stored profile or upload it to more than one system on the
network can result in instability or unexpected results.
