Faders
The faders control the following in your project:
• The track volume level.
• The automation envelope on the track (when in automation mode).
Preset buttons
The Preset buttons allow you to move left or right through the BCFview virtual display to expose all the tracks in your project. The virtual
channel view will display 8 tracks at one time.
Left
Right
Tracks 1-8 of your ACID project in the virtual view.
If you press the right preset button, the next set of tracks in your project
Preset buttons
will be exposed.
Pressing the left preset will take you back to tracks 1-8.
In the real world...
Adding envelopes and automating them
A couple of common questions when using the Behringer BCF2000 is “How do I add envelopes to an ACID track?” and “How do I set up
the Behringer to record the envelope’s moves?” The following instructions should guide you through that process.
1.
Open an ACID project.
2.
On the Behringer unit, turn on the automation mode by pressing Downshift+Edit.
For more information, see Encoder Groups buttons on page 292.
Note:
You can select multiple tracks at one time by pressing the bottom row of buttons for each track.
3.
In the track header, choose Automation Write (Touch) or Automation Write (Latch) to determine how the automation will be
written.
Automation Settings button in the track header
294 | APPENDIX B
