Filter
Top Products
120 Menus
Wap Settings
You can do WAP settings for three different WAP servers--UP.Link 1~3.
Settings for each UP.Link are as follows:
Activate Setting
Sets the selected UP.Link as the default server that your phones
connects to during an Internet session.
Auto Setting
Requests your operator to complete necessary WAP settings for
you.
Manual Setting
You can do the settings below on your own:
Bearers: Select bearer GSM_CSD if you register on a GSM
network. Select GSM_GPRS if you register on a GPRS network.
ISP Name: This is the name of your ISP (Internet Service
Provider).
Home Page: Designates the home page which your phone
connects to when logging on to the Web.
User Name: This is your user ID, given by your ISP.
8 Skip this option if you are on a GPRS network.
Password: key in the password provided by your ISP.
8 Skip this option if you are on a GPRS network.
/
•Your phone allows you to get access to the mobile Internet on
both GSM and GPRS networks. If you have registered on a
GSM network you must complete WAP settings in order to
connect to the Internet. If you have registered on a GPRS
network you will need to do both WAP and GPRS settings.
•Your network operator may have completed necessary WAP
and GPRS settings for you when you have registered with
them for WAP services. Please contact your operator and see if
you need to do the settings on your own.