Filter
Top Products
Chapter 2 37
Testing AMPS Base Stations
Transmitter SAT Frequency and Deviation
Chapter 2
Testing AMPS Base Stations
8. Set the Filter 2 field to 6 kHz BPF. This helps remove unwanted
noise.
9. Press the
RF Anl key to access the RF ANALYZER screen.
10.Enter the transmitter’s channel number in the RF Channel field.
11.Turn on the transmitter. The FM Deviation and AF Freq for the
SAT are displayed (as well as Frequency Error and TX Power).
Figure 2-4 SAT Frequency and Deviation Test Results
6kHz BPF
SAT Deviation
SAT Frequency
Main Menu