Filter
Top Products
Getting Connected 137
• Configure Wireless Networks screen.
Tap Start > Settings > Connections
tab > Wi-Fi > Wireless tab. This
screen displays the wireless networks
currently available.
To connect to a wireless network in
the list, tap and hold on the desired
network, then tap Connect.
Tap a wireless network in the list to
view or change its connection settings.
You can also add new wireless
networks, if available, by tapping Add
New.
10.5 GPRS
Use GPRS (or EDGE, if available) to connect to the Internet and to send and
receive picture messages on your device. You will need a data plan to use
your wireless service provider’s GPRS network. Check with your wireless
service provider to find out about GPRS rates.
GPRS settings are already preconfigured on your device, and your device is
ready to use your wireless service provider’s GPRS services. Please do not
change the settings as this may cause services to stop working.
To add a new GPRS connection
In times when you need to add another GPRS connection on your device,
obtain the Access point name from your wireless service provider. Also,
check if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line (GPRS), then tap
Next.