Filter
Top Products
2. Additional Setup
- Select “Settings” menu’ from “Internet ” menu”,
Select next menu “Accounts”. Open “Options”
menu by pressing Left Soft Key and select “Add”
option.
The following items need to be configured
- Press “Done” key to save any configuration changes.
3. Access Points
- User can list the available Access Points by
selecting “List” appears on Centre soft menu of
“Access point” parameter from Internet setting
value.
- User can add a new Access Point by selecting
“Add New” from “Option” menu.
- Press “Done” key to save any configuration
changes.
The details for Access Point parameters are as
follows:
106
Settings
Connection title Access Point profile name.
Bearer Choose the bearer from the list. (Default
is “UMTS/GPRS”)
Authentication Choose the authentication from the list.
(Default is “No auth”)
Username Information provided by Service Provider.
Password Information provided by Service Provider.
APN APN name to access network.
Information provided by service provider.
Traffic Class Choose the Traffic Class from the list.
(Default is "Subscribed")
Account title Settings account name.
(e.g. T-Mobile WAP)
Homepage Service URL. (e.g. www.t-zones.co.uk)
Connection Mode Choose from given list of connection
modes. (default is UDP (CO))
Proxy IP WAP Gateway IP address provided by the
operator. (e.g. 193.254.160.002)
Proxy Port Port details are provided by operator,
depending upon “Connection Mode”.
Security Choose “secure” connection if needed,
Default value is “Non-Secure”.
Timeout Linger time setting. (150 seconds as a
default)
Access Point Access point setting for the
corresponding service. (More details for
adding or editing new Access Point refer
step 3)