Filter
Top Products
6. Move the cursor to the E-mail address field and
configure the e-mail address for outgoing mail.
7. Move the cursor to the Reply e-mail address field
and configure the e-mail address to reply to your e-
mail.
8. Move the cursor to Maximum receive size and
configure the maximum e-mail size. The permissible
maximum receive size is no more than 300KB.
9. Move the cursor to Save to server and determine
whether to leave a copy of messages on the
incoming server or not. You can select On or Off
using the List key.
10. Move the cursor to the Outgoing mail server field
and configure the outgoing e-mail server.
11. Move the cursor to the Outgoing server port field
and configure the mail server port number. In
general, the outgoing mail server port number
(SMTP) is 25.
12. Move the cursor to the Incoming mail server field
and configure the incoming e-mail server.
13. Move the cursor to the Incoming server port field
and configure the mail server port number. In
general, the incoming mail server port number
(POP3) is 110.
14. Move the cursor the Email inbox type and select
the email inbox type. You can select one between
POP3 and IMAP4.
15. Move the cursor to the Access point field to select
an access point to connect to the Internet. You can
select a configured access point using the List key.
16. Move the cursor to the auto retrieve item and
decide a auto receiving E-mail message as a fixed
time slot, You can select on/off using the List key. If
you want to utilize this function, there is selected
auto retrieve in E-mail setting. But auto retrieve is
not selected, you can select auto retrieve in Option.
17. Move the cursor to the SMTP authentication field
and decide whether the outgoing mail server
requires authentication.
You can select On or Off using the List key.
18. Press the Option key and select [Advanced setting].
You can change DNS Server or APOP setting.
Editing an e-mail account
1. Select a desired e-mail account from the e-mail
account list and press the Edit key.
2. You can edit desired fields by moving the cursor up
and down.
69
Messages