Filter
Top Products
Contacts
Section 2E. Contacts 101
To cancel a Contacts entry at any time press Cancel
(right softkey) and then press
Yes (left softkey) to
return to the Contacts list or press o to return to
standby mode.
To create a Contacts entry:
1. Press M > Contacts > [New Contact].
– or –
Press M
> Contacts > M > New Contact.
2. If you want to assign a name to the entry:
Ⅲ Select Name. Enter the name. When you are
finished, press r.
3. If you want to assign a ring tone to the name:
Ⅲ Select Ring Tone/Picture and then select Ringer.
Select the ring tone you want to assign.
4. To assign a Contacts type to the number or
address being stored:
Ⅲ Select the Contacts type field.
Ⅲ Select the Contacts type you want to assign.
(
Mobile, DC, Work1, Work2, Home, Email, Fax, Pager,
Talkgroup, Group, IP, or Other.)
5. To store a number or address:
Ⅲ Select the # field (or ID for an email address, or IP
for an IP address).
Ⅲ Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
Connect numbers, be sure to include the
asterisks (*).
Ⅲ For email addresses, see “Entering Text” on
page 20.
Ⅲ When you are finished, press r.
Tip
Press Browse - (left softkey) to select a name
already in Contacts.
Tip
Press Browse - (left softkey) to select a number or
address from Contacts, the Recent Calls list, or
Memo.