Filter
Top Products
66 Section 2B. Settings
Assigning a Ring Tone to a Contact
You can also assign a ringer to a specific contact entry
so you know who's calling without looking at the
phone.
1. Press M > Ring Tones.
2. Scroll through the list of ring tones and select the
one you want to assign. A sample ringer will sound
as you highlight each option
3. Press r or press Assign - (left softkey).
4. Select A Contact....
5. Highlight the Contacts entry to which you want to
assign the ring tone.
6. Press r to assign the ringer.
Vibrate Settings
Vibrate All
The Vibrate All option allows you to mute all sounds
without turning your phone off.
To activate Vibrate All:
1. Press M> Ring Tones > Vibrate All.
2. Press r.
3. Set this option to On or Locked, and then
press r.
Tip
To set Vibrate All to On or Locked using the volume
controls: Press the volume controls to turn down the
volume as far as possible to set Vibrate All to On.
Continue to hold the volume control down to set
Vibrate All to Locked. Setting this option to
Locked
requires you to press and hold the volume control
up to turn
Vibrate All off. The Locked option helps
prevent you from accidentally turning
Vibrate All off.