Filter
Top Products
104 Section 2E. Contacts
Showing Only Direct Connect Numbers,
Groups, and Talkgroups
To set Contacts to show only entries that contain Direct
Connect numbers, Groups, and Talkgroups:
1. Press M > Contacts, and then press M.
2. Select Filter.
3. Set this option to DC/GC/Scngrp.
To set Contacts to show all entries:
1. Press M > Contacts, and then press M.
2. Select Filter.
3. Set this option to Show All.
Finding Speed Dial Numbers
ᮣ Press M > Contacts and select an entry. The speed
Dial Number will be listed directly under the
contact phone number.
Adding a Number or Address to an
Entry
1. Display a Contacts entry. (See “Viewing Contacts”
on page 103.)
2. Press M > Edit.
3. Scroll to the number type field above an open
number and press the navigation key right or left to
select a number type.
4. Scroll down to the open field, enter the new phone
number or address, and press r.
5. Press Done - (left softkey) to save the new
number.
– or –
To assign a speed dial number, select
[Options] >
Speed #, enter a speed dial number and press r.
Press
Back - (right softkey) and then press
Done - (left softkey to save the entry.
Tip
From Contacts, press Search - (left softkey) to
display the Search feature.