Filter
Top Products
Making Calls
Section 2A. Making and Answering Calls 55
4. Select Code.
5. Select a code.
6. Press Back - (right softkey) to return to the Direct
Talk standby screen.
Making and Receiving Code Calls in Direct Talk
Mode
To make a Code call using Direct Talk:
ᮣ In Direct Talk mode, press and hold the Direct
Connect button. Your phone displays
Transmitting,
along with the channel and code selected.
The tone emitted from your phone when making a
Direct Talk call is four beeps and sounds different from
the tone heard on Direct Connect calls conducted on
the network.
If you receive an error message, this means:
ⅷ There may be no parties on your channel or code.
ⅷ You are out of range.
When you receive a Code call using Direct Talk, your
phone displays
Receiving, along with the channel and
code selected. Answer a Direct Talk Code call just like
you would any other Direct Connect call.
Private Direct Talk Calls
Private Direct Talk allows you to silence all the calls on
a channel that are not directed specifically at you. To
do this, you must first set your phone to Private Only.
To set your phone to Private Only:
1. In Direct Talk mode, press Edit - (left softkey).
2. Select Code.
3. Select Pvt Only.
4. Press Back - (right softkey) to return to the Direct
Talk standby screen.
To reach you, other Direct Talk callers must be on your
same channel and dial your ten-digit wireless phone
number to reach you.