Filter
Top Products
easily take pictures or record videos. You
can later use your device to view or edit
the pictures and videos, share them on the
internet, or send them to compatible
devices.
Take a picture
Press and hold the camera key.
1 To activate the face tracking feature,
select
> Face detect.. The face
tracker detects and draws rectangles
around faces, even when they are
moving.
2 Press the camera key. Do not move the
device before the picture is saved and
the final picture displayed.
To change the default memory to save
pictures to, select Options > Settings >
Memory in use and the desired memory
location.
Save location information to your
pictures and videos
If you sometimes struggle to remember
exactly where you were when you took a
particular picture or video while hiking or
traveling, you can set your device to
automatically record the location.
Press and hold
.
Activate the location recording feature
Select Options > Settings > Save
location info > Yes.
It may take several minutes to obtain the
coordinates of your location. The
availability and quality of GPS signals may
be affected by your location, buildings,
natural obstacles, and weather
conditions. If you share a file that includes
location information, also the location
information is shared, and your location
may be visible to third parties viewing the
file. This feature requires network service.
Location information indicators:
— Location information is unavailable.
Location information may not be saved to
pictures or videos.
— Location information is available.
Location information is saved to pictures
or videos.
Location information can be attached to
an image or a video if location coordinates
can be determined via network and GPS.
If you share an image or a video which has
location information attached, the
location information may be visible to
others that view the image or the video.
You can deactivate geotagging in the
camera settings.
Picture and video tips
Press and hold the camera key.
When taking a picture:
• Use both hands to keep the camera
steady.
• When you zoom in, the image quality
may decrease.
• The camera activates battery saving
mode after about a minute of
inactivity. To activate the camera
again, press the camera key briefly.
• You can set the user defined scene to
be used as the default scene every
time you open the camera. Select
> Scene mode > User
defined > Edit. Edit the settings, and
Camera 41