Filter
Top Products
Telephone settings
Select Menu > Tools > Settings > Phone.
Select from the following:
• Call — Define general call settings.
• Call divert — Define your call divert settings.
See
"Call divert", p. 84.
• Call barring — Define your call barring settings.
See "Call barring", p. 84.
• Network — Adjust the network settings.
Call settings
To display your phone number to the person you are
calling, select Call > Send my caller ID > Yes. To let
the network determine whether your caller ID is sent,
select Set by network.
To display your net call address to the person you are
calling using a net call, select Call > Send my internet
call ID > Yes.
To be notified of a new incoming call while you have a
call in progress, select Call > Call waiting >
Options > Activate. To check if the function is active
on the network, select Options > Check status.
To select whether net calls alert or not, select Call >
Internet call alert. You are notified of missed net calls
with a notification.
To set the default call type, select Call > Default call
type and select Voice call if you make a GSM calls, or
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select Call > Reject call with
SMS > Yes. To set the text for the message, select
Call > Message text.
To set off the contact search on the home screen, select
Call > Contact search > Off.
Network settings
Select Menu > Tools > Settings > Phone >
Network.
To select the network mode, select Network mode
and Dual mode, UMTS, or GSM. In the dual mode, the
device switches automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and
reduce the battery life. In regions close to both
GSM and UMTS networks, selecting Dual mode
may cause constant jumping between the two
networks, which also increases the demand on
battery power.
To select the operator, select Operator selection and
Manual to choose from available networks, or
Automatic to have the device select the network
automatically.
To set the device to indicate when it is used in Micro
Cellular Network (MCN), select Cell info display >
On.
129
Settings