Filter
Top Products
EAP plug-ins make possible the use of various EAP
methods (network service).
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select Options >
New access point and define an access point that
uses WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2 as the security mode.
3. Select WLAN security settings > WPA/WPA2 >
EAP > EAP plug-in settings.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select Options > Disable.
To edit the EAP plug-in settings, select Options >
Edit.
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-
in before other plug-ins when connecting to the
network with the access point, or Options > Lower
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu > Tools > Settings > Connection >
SIP settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
To create a SIP profile, select Options > New SIP
profile > Use default profile or Use existing
profile.
To select the SIP profile you want to use by default for
communication sessions, select Options > Default
profile.
Edit SIP profiles
Select Options > Edit, and select from the following:
• Profile name — Enter a name for the SIP profile.
• Service profile — Select IETF or Nokia 3GPP.
• Default access point — Select the access point to
use for the internet connection.
• Public user name — Enter your user name received
from your service provider.
• Use compression — Select if compression is used.
• Registration — Select the registration mode.
• Use security — Select if security negotiation is
used.
133
Settings