Filter
Top Products
To call your voice mailbox (network service), press and hold 1.
To access the calendar, scroll right.
To write and send text messages, scroll left.
To launch the Camera application, scroll up.
To access your contacts, scroll down or press the scroll key.
To change the profile, press the power key briefly, scroll to the profile you want, and press the scroll key to activate the profile.
To open Services and connect to the Web, press 0.
To change these shortcuts, select Menu > Tools > Settings > Phone > Standby mode.
Display indicators
The device is being used in a GSM network. The bar next to the icon indicates the signal strength of the network at your
current location. The higher the bar, the stronger the signal.
The device is being used in a UMTS network (network service). The bar next to the icon indicates the signal strength of the
network at your current location. The higher the bar, the stronger the signal.
The battery charge level. The higher the bar, the stronger the charge in the battery.
You have one or more unread messages in the Inbox folder in Messag..
You have received new e-mail in the remote mailbox.
The device keypad is locked.
The device is locked.
You have one or more missed phone calls.
An alarm is active.
You have selected the silent profile, and the device does not ring for an incoming call or message.
Bluetooth is on.
An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection
has been lost.
A GPRS or EGPRS packet data connection is available.
A UMTS packet data connection is available.
A GPRS or EGPRS packet data connection is active.
A UMTS packet data connection is active.
A GPRS or EGPRS packet data connection is on hold.
A UMTS packet data connection is on hold.
You have set the device to scan for wireless LANs, and a wireless LAN is available.
A wireless LAN connection is active in a network that does not have encryption.
A wireless LAN connection is active in a network that has encryption.
The device is registered with a SIP server, and you can make net calls.
Your device is connected to a PC with a USB data cable.
A data call is active.
and Indicate the phone line that you have selected, if you have subscribed to two phone lines (network service).
All calls are forwarded to another number.
A headset is connected to the device.
The connection to a headset with Bluetooth connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
Text phone is connected to the device.
Your device is synchronizing.
G e t s t a r t e d
© 2007 Nokia. All rights reserved. 14