Filter
Top Products
Tip: You can set important topics as hot topics. Scroll to the topic, and select Options > Hotmark. While the device is
in the standby mode, you are notified when you receive a message related to a hot topic.
To cancel the reception of cell broadcast messages, select the language of received messages, and select whether to
automatically detect new cell broadcast topics, select Options > Settings.
To add, edit, or delete topics, select Options > Topic, and select Add manually, Add from index, Edit, Delete or Delete all.
To store a cell broadcast message in the device memory, select the message and Options > Save. You can store up to 50 messages
in the device memory.
To find the numbers and addresses the cell broadcast message may contain, select Options > Find and Phone number, E-mail
address, or Web address. You can then call and send messages, open browser pages, or create bookmarks and contact cards.
To delete a message, press the backspace key.
Message settings
Fill in all fields marked with Must be defined or with a red asterisk.
Your device may recognize the SIM card provider and automatically configure the correct text message, multimedia message,
and GPRS settings. If not, contact your service provider for the correct settings, order the settings from your service provider in
a configuration message, or use the Settings wizard application.
Text message settings
Select Options > Settings > Text message.
Define the following:
• Message centres — View the available message centers for your device.
• Msg. centre in use — Select a message center to send the message.
• Character encoding — Select Reduced support to use automatic character conversion to another encoding system when
available.
• Receive report — Select Yes if you want the network to send you delivery reports on your messages (network service).
• Message validity — Select the length of time that the message center continues to resend your message if the first attempt
fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message
center.
• Message sent as — Convert the message to another format, such as Text, Fax, Paging or E-mail. Change this option only if you
are sure that your message center is able to convert text messages into these other formats. Contact your network operator.
• Preferred conn. — Select the preferred method of connection when sending text messages from your device.
• Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number
(network service).
Multimedia message settings
Select Options > Settings > Multimedia message.
Define the following settings:
• Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image
size of multimedia messages.
• MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that
may not be supported by the network or the receiving device. To receive warnings about including such content, select
Guided. To create a multimedia message with no restrictions on attachment type, select Free. If you select Restricted, creating
multimedia presentations is not possible.
• Access point in use — Select the default access point to connect to the multimedia message center. You may not be able to
change the default access point if it is preset in your device by your service provider.
• Multimedia retrieval — Select Always automatic to always receive multimedia messages automatically, Auto. in home
network to receive notification of a new multimedia message that you can retrieve from the message center (for example,
when you are traveling abroad and are outside your home network), Manual to retrieve multimedia messages from the
message center manually, or Off to prevent receipt of any multimedia messages.
• Allow anon. msgs. — Select whether you want to receive messages from unknown senders.
• Receive adverts — Select whether you want to receive messages defined as advertisements.
• Receive report — Select Yes to have the status of the sent message to be shown in the log (network service). Receiving a
delivery report of a multimedia message that has been sent to an e-mail address may not be possible.
• Deny report sending — Select Yes to not send delivery reports from your device for received multimedia messages.
• Message validity — Select the length of time that the message center continues to resend your message if the first attempt
fails (network service). If the recipient of a message cannot be reached within the validity period, the message is removed
from the multimedia messaging center. Maximum time is the maximum amount of time allowed by the network.
M e s s a g e s
© 2007 Nokia. All rights reserved. 32