Filter
Top Products
Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the charger to the device. If the battery is
completely discharged, it may take a while before
the charging indicator starts scrolling.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but
the charging levels may vary. To reach the full
operation time, charge the battery until it has been
fully charged according to the battery level indicator.
Tip: You can use older style Nokia chargers with
your device by attaching the CA-44 adapter to
the old charger. The adapter is available as a
separate enhancement.
Insert the memory
card
Use a memory card to save the memory on your device.
You can also back up information from your device to
the memory card.
The sales package of your device may not include a
memory card. Memory cards are available as separate
accessories.
1. Open the cover of the memory card slot.
2. Insert the memory card in the slot with the contact
area first. Ensure the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the cover.
Eject the memory card
Important: Do not remove the memory card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select Remove
memory card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from
the memory card slot.
4. Close the cover.
17
Set up your device