Filter
Top Products
Paragon Wireless dual mode mobile phone user’s manual Page 8
Warning:
The prescribed charging temperature is 0℃－45℃ (32F－113 F). Please do not use charger when
the temperature is out of this range. Only use the charger provided by the manufacture. Using an
unauthorized charger may be hazardous and void the warranty of your phone.
1.3.4 Signal Strength Indication
While the phone is in operation, the signal strength level is on the left top corner of the screen. The
signal strength is shown with a four level indicator. When there is no indicator, the signal strength is
at its weakest and you will be unable to make a call, send/receive messages or use any other
network-related services. When the indicator has four bars, the signal strength is at its strongest.
Voice and signal quality is to a great extent affected by obstacles, so moving around may effectively
improve signal quality.
1.3.5 Power-up and Power-down the phone
Press and hold the
Pwr button for about three seconds to power up the phone. A startup image
will be shown once the phone has been powered up properly. Press and hold the Pwr button when
the phone is ON to power it down. A power down image will be shown.
1.3.6 Phone locking
To prevent unauthorized usage of the phone, you can lock the phone manually or automatically. To
lock and unlock the phone, a configurable password is required. The factory default password to
lock the phone is 0000. The password can be changed by using the Setting-> Security Settings->
Change password function.
Recommendation: The owner of the phone should reset the 4-digit lock password as soon as the
phone is purchased.
1.3.7 Function selection and operation
phone book
call history
user documents, pictures, and multimedia files
setting
dial panel