Filter
Top Products
Paragon Wireless dual mode mobile phone user’s manual Page 30
6.6.7 Connecting alert
This feature, if turned ‘On’, alerts the user with a ‘beep’ sound when a connection is established.
6.6.8 Hide my number
This feature allows you to dial anonymously by hiding your number from your receiver. There ar
three options:
Default – Keep the current state of the setting as is.
Hide – Hide your phone number on your calls.
Show – Enable Call ID information for the subsequent calls.
Note: The Hide my number option requires network support.
6.6.9 Prefix dial
This feature allows the user to set up a prefix for the outgoing calls using ‘Prefix dial’ function.
6.7 Calibration
6.7.1 Stylus calibration
If your phone does not seem to be responding correctly to the stylus, you must calibrate it by
following the below instructions:
1. In “Setting” list, click “Calibration” to open the pen calibration option, click “Stylus calibration”
to open the screen calibration window.
2. Click OK on the bottom left of the screen and start the calibration according to the directions.
The screen will display “Calibration done”. Click Back to exit.
6.7.2 Hot key calibration
When you feel that hot keys at the bottom of the touch screen is not responding accurately, you
should calibrate the hot key to ensure that the mobile phone will make the correct response to click
actions.
1. Click “Hot key calibration” to open the hotkey calibration window.
2. Click OK on the bottom left of the screen to start the calibration according to the directions.
Click the virtual keys twice and the screen will display “Calibration done”. Click Back to exit.
6.8 Security settings
6.8.1 Lock now
Use this option to lock the phone immediately and keep it from unauthorized use. When you click the
item the screen display will ask you to input a security code. Click the simulated keyboard to input
the unlock key and then click OK. If the password is not correct the display will show “Invalid
password”. The default password is 0000.
6.8.2 Automatic locking
This feature can lock the phone automatically at power-on. This option can be set to “On” or “Off”
The default password is 0000.