If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
Network key: [11/11]
Settings
123
My network key
20
Confi guration
Manual network confi guration - cont.
9. WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever
you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal
Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting
should match that used by your router. Some routers allow both to be specifi ed, and the
router will use whichever variant is supported by the connected device. AES is regarded
as the more secure option if it is available.
10. The radio will then require you to enter the encryption key. This must be a string of between
8 and 63 characters and must be identical to the key which has been entered into your
router. Note - the encryption key is sensitive to the use of upper and lower case letters
and symbols. Take care to enter the key exactly, or the radio will not be able to connect
to your router.
Once the key is entered the radio should connect to the network.
11. While the radio is trying to connect to the network, it will display 'Processing...' when
checking the encryption key (if using the WiFi connection) and then 'Connecting...'. If the
connection is made successfully, the radio will return to the Network settings menu. If
the unit cannot connect, then it will display a 'Failed to connect' message and will return
to the SSID entry screen (step 6).
Once connected, the network settings are stored in the radio. The settings are retained
when the radio is disconnected from the mains.
You may now use the Back and Mode buttons to access the functions of your radio.
Settings
15:05 26 Jun 2010
TKIP
AES
Encryption type [10/11]