Filter
Top Products
69
Clock and Alarms
Automatically updating the clock
Your radio will normally update the clock automatically when connected
to the internet.
You may wish to use the radio away from the internet, in which case you
may specify that the unit sets its clock from DAB or FM radio broadcasts.
After a power failure the radio will then set its clock the next time that you
turn on the radio in DAB or FM mode.
Alternatively you may specify that the time is not automatically updated.
In this case the clock must always be set manually after a power
interruption.
Sett i ng s
From the home menu press the Settings mode button. The
main settings menu will be displayed.
Touch Time settings.
Select Time Source to enter the time setup. The current time source will
be displayed in yellow.
Touch Internet, DAB, FM or None as required. The radio will return to
the previous menu display.
If you choose none you will need to set the clock manually, see
page 70.
Settings
15:05 26 Jun 2010
Time settings
Alarm settings
Equaliser settings
Network settings
Settings Menu
Normal
Settings
15:05 26 Jun 2010
Time Zone
Use Daylight Savings
Time Source
Manual Setup
Time Settings
0 hrs (UTC)
Yes
Internet
Settings
15:05 26 Jun 2010
None
Internet
DAB
FM
Select Time Sync Source