Roberts Radio ColourStream Cell Phone User Manual


 
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
84
Information
Software update
From time to time, new software features for your radio may be developed.
Your radio has therefore been designed to allow its internal software to
be updated using your Internet connection.
You should not attempt to update your radio unless it is recommended to
you by Roberts Customer Services. Updating the software may remove
all network settings, radio station presets and alarm settings from your
radio.
It is important that you do not attempt this procedure unless you have a
good Internet connection and a reliable mains power supply. If the radio
connects to your router using a WiFi connection, make sure that this is
also reliable before proceeding.
If you choose to update your radio it will fi rst download the new software
and will then reprogram its internal memory. This may take a few minutes
depending on the speed of your internet connection.
Once the software update is completed, the radio will prompt you to restart.
You may fi nd that you will need to reconfi gure your network connection
following an update. You may also need to re-enter all radio station presets,
alarm settings, and confi guration options.
VERY IMPORTANT: Do not switch off the power to the radio until the
update operation is complete and the radio has restarted, otherwise the
unit may become permanently damaged.
Sett i ng s
From the home menu press the Settings mode button.The
main settings menu will be displayed.
Select Miscellaneous settings.
Select Software update, the current setting will appear in yellow.
If you
want your radio to check periodically for new software versions select
Enabled to proceed. If you wish to disable the software update select
Disable.
To check if there are any software updates available currently, touch Check
for Updates. The radio will check to see if an update is available. The
display will show 'Checking'. If there are no updates then the display will
show 'Software up to date'. If a software update is available your radio
will then offer the choice of updating the software or not, displaying 'New
version available. Update software?'. Touch Yes option if you wish to go
through the update process.
Settings
15:05 26 Jun 2010
Sleep
Standby Backlight Off
Software update
Check for Updates
Miscellaneous Settings
OFF
Never
Enabled
Settings
15:05 26 Jun 2010
Check for Updates
Display backlight
Software version
Factory reset
Miscellaneous Settings