Filter
Top Products
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
68
FM Radio
Scan setting - FM
When using the FM mode your radio can be set either to scan local stations
or to scan all stations including distant radio stations.
From the FM Menu list touch Stop on stations. The current setting will
be displayed in yellow. To set your radio so that only the stations with
the strongest signals are found during scanning touch Stop on stations
until '
Strong' appears on the display. (Normally this will restrict scanning
to local transmissions).
Alternatively, to set your radio so that all available stations are found during
scanning (local and distant transmissions) touch Stop on stations until
'All' appears on the display.
FM
FM Menu
15:05 26 Jun 2010
My Favourites
Stop on stations
Edit favourites
Force mono
Strong
No
Stereo / Mono switching - FM
If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
Enter the FM Menu list.The current stereo/mono setting will be displayed
in yellow.
To switch to mono mode in order to reduce the hiss from a weak FM signal
select Force mono until 'Yes' appears on the display.
Alternatively, to return to the stereo/mono mode touch Force mono until
'No' appears on the display.
FM
FM Menu
15:05 26 Jun 2010
My Favourites
Stop on stations
Edit favourites
Force mono
Strong
Yes