Filter
Top Products
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
82
Display and Audio
Auxiliary input socket
A 3.5mm Auxiliary Input socket located on the rear of your radio is
provided for connecting the audio signal from an external audio source
such as an MP3 or CD player.
Connect a stereo lead from the headphone output of your MP3 or CD
player to the Aux In socket located at the rear of the radio. Typically this
lead will have a 3.5mm stereo plug at both ends.
Switch on your radio.
From the home menu press the Aux mode button
AUX
Press 'play' on the connected audio device. If you are using its headphone
output for the connection, set its volume control to a level of somewhere
between two-thirds and maximum (the objective is to get a strong audio
signal but without too much distortion). Then adjust the volume on the
radio as required.
Note, if using an iPod as the sound source, you may need to set its output
to maximum to get an adequate audio signal level.
After use, disconnect your player in order to listen to your radio
conventionally.
Aux In
Auxiliary input
15:05 26 Jun 2010