Filter
Top Products
Camera
Section 2I. Camera 115
Adjusting Settings
There are three categories of settings that can be made
within camera/camcorder mode:
ⅷ General
ⅷ Camera
ⅷ Camcorder
General Settings
These are options that apply to both the camera and
camcorder such as Viewfinder, Auto save, Default
Storage, and Time Out.
1. Press Start > All Programs > Camera > Menu
(right softkey).
2. Use the navigation key to select the Settings icon
( ) and press .
3. Select General and press .
Setting the viewfinder format:
1. From the General menu, select Viewfinder and use
the navigation key to select from one of the
available options:
Ⅲ Normal View displays a common set of icon
indicators along the top portion of the screen
Ⅲ No Indicators displays only and the softkey
options (
View and Menu) along the bottom portion
of the screen.
Ⅲ Guideline view displays a 3x3 grid over the entire
display to help you compose the image. This view
also provides the standard icon indicators along
the top portion of the screen.
2. Press Done (left softkey) to store the setting.
Enabling autosave:
1. From the General menu, select Auto save and use
the navigation key to select a setting:
Ⅲ On automatically stores the new picture or video into
the default storage location. This option bypasses the
Save option being presented onscreen.
Ⅲ Off causes an onscreen Save option to appear
onscreen. This requires that you choose whether
to save or discard each new image/video.
2. Press Done (left softkey) to store the setting.
I325.book Page 115 Monday, October 27, 2008 12:20 PM