Filter
Top Products
44 Section 2B. Your Device’s Settings
2.
Use your navigation key to scroll through the
available tones (default is
Click). A sample tone will
sound as you highlight each option.
3. Press Done (left softkey) to assign a tone.
Call Alert Notification
Your device can alert you with an audible tone when
you change service areas, once a minute during a
voice call, or when a call has been connected.
1. Press Start > All Programs > Settings > Sounds > Call
Alert.
2. Select Minute beep, Connect tone, or Signal fade tone.
3. Select On or Off for each category and press Done
(left softkey).
Selecting an R2VS Setting
R2VS™ significantly enhances the quality of mono and
stereo audio by simulating stereo sound through a
connected headset, thereby creating improved
dynamics and bass performance. R2VS provides
panoramic three-dimensional audio that extends the
sound beyond the speakers or headphones
themselves. These enriching effects are especially
noticeable on digitally compressed audio formats such
as MP3 and WMA.
To utilize this feature, your device needs to be
connected to a headset via the Power/Accessory
Interface Connector.
1. Press Start > All Programs > Settings > Sounds > R2VS.
2. Use your navigation key to scroll through the
available stereo settings.
Ⅲ Choose None (Mono), 3D Sound, or M-Theater.
3. Press Done (left softkey) to assign a setting.
Assigning Sound Profiles
Using profiles, you can adjust and customize device
tones for different events or environments and then
apply the settings as a group. The currently selected
profile is displayed in the upper-right section of the
Home screen.
1. Press Start > All Programs > Settings > Profiles.
2. Select Normal, Silent, Vibrate, Outdoor, or Automatic
and press
Done (left softkey).
I325.book Page 44 Monday, October 27, 2008 12:20 PM