Filter
Top Products
Settings
Section 2B. Your Device’s Settings 53
To enable Any key answer:
1. From the standby screen, press Start > All Programs
> Settings > Phone > Call Options.
2. Use the navigation key to highlight the “Any key
answer” field and press to select the check
box.
Auto Answer Mode
You may set your device to automatically pick up
incoming calls when connected to an optional hands-
free car kit or headset.
To enable or disable auto-answer mode:
1. From the standby screen, press Start > All Programs
> Settings > Phone > Call Options > Auto Answer.
Ⅲ Choose Never, 2 seconds, 4 seconds, 6 seconds,
8 seconds or 10 seconds.
Ⅲ Assigning a time causes all calls to be
automatically answered when the device is
connected to a hands-free car kit or a headset
(sold separately).
2. Press the navigation key left or right to select a new
time setting and press
Done (left softkey).
Reviewing Your Voicemail Number
During the initial system setup, the device automatically
detected and set your voicemail number. If this field is
blank, you can manually enter the number obtained
from Sprint Customer Service.
Assigning an International Country Code
You can enter a frequently used country code that will
be entered when plus code dialing is used. The Plus
Code Dialing Key ( ) automatically dials the
international access code for the country in which you
are located.
This field allows you to prepend multiple dialing codes
to a number. This can be useful for long distance
dialing where the international prefix, country code, and
city code are already stored on the device.
Note
Although this field is editable, it is not recommended
that this number be altered.
I325.book Page 53 Monday, October 27, 2008 12:20 PM