Filter
Top Products
Changing Your Settings 89
Adding a Basic VPN
Before you add a VPN you must determine which VPN
protocol to use: PPTP (Point-to-Point Tunneling Protocol),
L2TP (Layer 2 Tunneling Protocol), L2TP/IPSec PSK (Pre-
shared key based L2TP/IPSec), or L2TP/IPSec CRT
(Certificate based L2TP/IPSec).
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to “Lock
Screen Settings” on page 96.
2. From the main Settings screen, tap
More networks
➔
VPN
.
3. Tap
Basic VPN
.
4. Tap
(Add VPN network)
.
5. Enter a name for the VPN network in the
Name
field.
6. Select a VPN type from the
Type
drop-down menu.
7. Enter the Server address and any other required fields
that are dependent upon the
Type
you entered
previously.
8. Tap the
PPP encryption (MPPE)
check box to enable
encryption.
9. Tap the
Show advanced options
check box to display
additional VPN options.
10. Tap
Save
to save your VPN settings.
Adding an IPsec VPN
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to “Lock
Screen Settings” on page 96.
2. From the main Settings screen, tap
More networks
➔
VPN
.
3. Tap
Advanced IPsec VPN
.
4. Tap
(Add IPsec VPN network)
.
5. Enter a password, confirm the password, and tap
OK
.
6. Enter a name for the VPN connection in the
VPN
connection name
field.
7. Select an
IPsec connection type
from the drop-down
menu.
8. Enter any other required information.
9. Tap
Show advanced options
to display additional VPN
options.
10. Tap
Save
to save your VPN settings.