Filter
Top Products
Introduction 10
Note:
The device has been tested to support cards of up to 32GB. This
microSD card is an optional accessory, a card greater than 2GB is
recommended.
Warning!:
DO NOT remove a microSD card while files are being accessed or
transferred, as this can result in loss or damage of data.
Caution!:
Make sure your battery is fully charged before accessing/using the
microSD card. Accessed data may become damaged or unusable if
the battery runs out while using the microSD card.
Caution!:
Ejection of the card is spring-loaded. As the microSD card is being
discharged from the slot, be prepared to catch it and keep it from
falling onto the floor.
Installation of the microSD Card
1. Locate the microSD card slot.
2. Flip open the microSD card slot cover.
3. With the gold contact pins facing downward, carefully
insert the card into the opening and firmly push it in until
you hear a click (indicating the card is securely installed).
4. Once you are notified, touch
Hide
(from the bottom left of
the screen) to acknowledge the card is properly inserted
and ready to use.
Important!:
It is recommended you only use an optional microSD card of at
least 2GB (up to 16GB). Using non-recommended microSD cards
could cause data loss and damage your device.
Incorrect
Correct
MIC
MIC
SWD-M100.book Page 10 Tuesday, July 21, 2009 2:44 PM