Filter
Top Products
5
Initial Device Setup
If your device has never been powered on before and is
initializing for the first time, you will need to follow these
procedures. These same steps are necessary if the device is ever
Hard Reset (to factory default parameters).
1. Touch the main Windows Mobile 6.1 screen to begin the
initialization process.
2. Remove the Stylus from the side compartment (adjacent to
the Left Action key) (seen below).
3. Use your stylus to calibrate the touch accuracy of the
screen by both accurately and firmly touching the center of
each onscreen crosshair. Repeat this process for every
crosshair that appears until this step has successfully
completed.
Note:
This process may need to be repeated to accurately calibrate the
device. Once successfully calibrated, you are directed onto the Time
and Date screen.
Left Action key
Stylus
SWD-M100.book Page 5 Tuesday, July 21, 2009 2:44 PM