Filter
Top Products
55
2.
Touch the
System
tab, then tap
Backlight
.
•
By default, the device is set up to automatically adjust the backlight
brightness level.
3. Tap the
Manual Adjustment
radio box, then touch and drag
the slider to adjust the brightness level.
•
If the slider does not respond to a sliding action, tap the slider at a
different location to change the setting.
4. Touch to save your new selections and return to the
System
tab.
Customizing Your Power Settings Page
Keeping track of the battery’s charge is very important. If the
battery level gets too low, your device automatically shuts down
and can cause you to lose important data.
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
•
The
Battery
tab indicates the current charge state of the internal
battery.
Adjusting the Device’s Behavior - Battery Powered
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
3. Touch the
Battery Power
tab and begin to make your
changes.
4. Touch a box to activate a feature and then alter its
corresponding field.
• Turn on backlight
turns the backlight back on after a shutoff, when
a button is pressed or the screen is tapped.
• Turn off backlight
provides a power save feature for your device to
conserve battery power by turning off only the screen. Values range
from Always on to 5 minutes.
• Turn off device
provides a power save feature for your device to
conserve battery power by turning off the entire device. Values
range from Always on to 5 minutes.
5. Touch to save your new settings and return to the
System
tab.
Adjusting the Device’s Behavior - Externally Powered
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
3. Touch the
External Power
tab and begin to make your
changes.
ok
ok
SWD-M100.book Page 55 Tuesday, July 21, 2009 2:44 PM