Filter
Top Products
Customizations 56
4.
Touch a box to activate a feature and then alter its
corresponding field.
• Turn on backlight
turns the backlight back on after a shutoff, when
a button is pressed or the screen is tapped.
• Turn off backlight
provides a power save feature for your device by
turning off only the screen. Values range from 1 minute to Always
on.
• Turn off device
provides a power save feature for your device by
turning off the entire device. Values range from 1 minute to Always
on.
5. Touch to save your new settings and return to the
System
tab.
Adjusting the Device’s Behavior - Keypad
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
3. Touch the
Keypad
tab and begin to make your changes.
4. Touch a box to activate a feature and then alter its
corresponding field.
• Keypad light
turns the keypad light either Off (no key presses will
activate it) or On (where it turned on anytime its it used or during a
Custom Time (where the Keypad illuminates during a set range of
time- Start Time and End Time).
• Keypad light time
determines the length of time the keypad
remains illuminated after a key is pressed (1 to 10 seconds).
5. Touch to save your new settings and return to the
System
tab.
Adjusting the Device’s Behavior - VoIP
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
3. Touch the
VoIP
tab and begin to make your changes.
4. Touch a box to activate a feature and then alter its
corresponding field.
• Turn off backlight when calling
turns the backlight either Off for a
set amount of time during a VoIP call (Always turn on, 5 seconds -
10 seconds).
5. Touch to save your new settings and return to the
System
tab.
Adjusting the Device’s Behavior - Performance
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Power
.
3. Touch the
Performance
tab and begin to make your
changes.
ok
ok
ok
SWD-M100.book Page 56 Tuesday, July 21, 2009 2:44 PM