Filter
Top Products
29
4.
Touch the
Notifications
tab to then assign specific audio
files (or vibrate) to play for specific applications or actions.
5. Touch the
Event
drop-down list and select one of the
following events:
• ActiveSync: Begin sync
• ActiveSync: End sync
• Beam: Autoreceive
• Connection disconnected
• Connection established
• Messaging: New e-mail message
• Reminders
• Wireless network detected
6. Activate any of the following notification actions by tapping
the field adjacent to each:
• Play Sound
• Repeat
• Display message on screen
• Flash light for
•Vibrate
7. Touch to save your new settings and return to the
Personal
tab.
Formatting the Device’s Memory
Both the internal device storage location (Main Storage) and
microSD card (Storage Card) can be cleared of content via a Hard
Reset and reformat process.
The
Main Storage
(My Device) location has only ~90 MB of
storage capacity to contain your installed applications and files.
Once this capacity is reached, you can obtain an error message
indicating you need to clean up the Main Storage location (you
have reached the 90 MB limit of your storage capacity and can
no longer install additional applications).
The
My Storage
location contains as much storage capacity as
provided by your internal microSD card. If given the option for the
destination of installed applications and files, it is recommended
you use the My Storage location on the microSD card.
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab and tap
Hard Reset
.
•
The
Memory
tab refers to the device’s internal memory storage.
•
The
Storage Card
tab refers to the installed microSD card’s
storage.
Note:
This can also be accessed from a similar menu by using the following
steps: tap the
Applications
shortcut
> Basic Settings
.
3. Touch the
Memory
tab.
ok
SWD-M100.book Page 29 Tuesday, July 21, 2009 2:44 PM