Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 203

Configuration Commands

Rev 3.0B Feb.08 130

• n=1:AssertDCDwheninadatamode(UDP,TCP,PPP,or

SLIP)(Default).

• n=2:AssertDCDwhenthemodemhasnetworkcoverage.

&Dn

SetDTRmode.

• n=0:IgnoreDTR,sameeffectasHWDTRalwaysasserted

(sameasS211=1).

• n=2:UsehardwareDTR(sameasS211=0).

&Sn

SetDSRmode.

• n=0:AlwaysassertDSR(Default).

• n=1:AssertDSRwheninadatamode(UDP,TCP,PPP,or

SLIP)(Default).

• n=2:AssertDSRwhenthemodemhasnetworkcoverage.

Tip: S211 can also be used to request that DSR is always asserted. If

S211 is set to 3 and &S is changed to a non-zero value, S211 will be

changed to 1.

\APPP

SetmodemoperationtoPPPmode.Cannotbeconfiguredin

AceManager.\ASLIP

SetmodemoperationtoSLIPmode.DTRmustbeasserted

(&D0orS211=1).CannotbeconfiguredinAceManager.

\Qn

Setorquerytheserialportflowcontrolsetting.

• n=0:Noflowcontrolisbeingused.

• n=1:RTS/CTShardwareflowcontrolisbeingused.

• n=4:Transparentsoftwareflowcontrol.Usesescaped

XONandXOFFforflowcontrol.XONandXOFF

charactersindatastreamareescapedwiththe@character

(0x40).@indataissentas@@.

*CTSE=n

ClearToSendEnable:ThisfeatureassertsCTSwhenthereisa

networkconnection.

• n=0:Disabled(Default).

• n=1:EnableassertionofCTSwhenthereisnetwork

coverage.

previous next